Solidoodle Dial Indicator Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for Pittsburgh Harbor Freight 1" Travel Machinists Dial Indicator. Snaps on to the PEEK insulator and uses 2…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Mount for Pittsburgh Harbor Freight 1" Travel Machinists Dial Indicator. Snaps on to the PEEK insulator and uses 2 socket head cap screws to line it up.
Instructions
Had to use support in order to build the part (picture included showing this). After printing it I carefully ran a 3/8" drill bit thru the large hole to fit the dial indicator. and ran a 7/32" drill bit thru the top holes to fit the socket head cap screws.
Used in conjunction with http://www.thingiverse.com/thing:167459 which replaces the back plate of the dial indicator. The original plate had a huge thing sticking out.
I think the STL is upside down. Reorient when printing.
Category: 3D Printer Accessories