1 / 2
T-Slot Framing Fastener Nut (Aluminum Construction Extrusion)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily Lost Nut is used with the assembly of Extrusion Frames. It's normally steel, but for light duty, PLA seems OK.
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 790
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (78)Powiązane
I copied the framing nut provided with the Ender 3 and deepened the thread length a bit.
I needed to enlarge the female thread with a 3 mm tap.
I did not copy the bolt.
The nut is used in my "Filament Sensor" offering shown elsewhere in this competition.