1 / 3
Rockwell Jawhorse Rear Leg Bolt Head Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement bolt head holder part #60012390 for the Rockwell Jawhorse.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement bolt head holder for the Rockwell Jawhorse. The original part is circular, but this model is a cut-down version to reduce material.
If printed with the hex head side down, it should print without supports on printers that can handle 45 degree overhangs. There is a thin layer of material between the hex and round sections that will need to be cut out or punched through.