Orbea Wild M10 multi mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for water bottle cage, Pro CO2 and tube mount, and 1UP pump.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 1501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this mount to hold a water bottle, the Pro Integrated CO2 Bicycle Saddle Mount Bracket - PRAC0130, and a 1up pump, on the factory water bottle mount.
It is very strong and fits my bike well, printed in Apollo X at 25% fill.
it uses 4 and 5mm self locking nuts and screws, please make sure that the bolt length that you choose WILL NOT be longer that the mount when fully tightened, this will push the screw into your frame and damage it. Also make sure that the screws that go into the factory water bottle mount are not to long, they will bottom out, and leave the mount loose.
Nuts will have to be tapped in to their holes, I did this on purpose so they do not fall out.
I make no guarantees that this will fit and work with your bike, adjust as needed.