1 / 7
Valve Steam Deck Dock - Adapter for Dbrand Killswitch Case - Killdock
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fit the Dbrand's Killswitch Case into the official Steam Deck Dock
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 2433
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (16)Powiązane
Details:
Dbrand's Killswitch Case does not fit the official Steamdeck Dock. With this adapter you can keep the case on the deck and still use the official dock.
NOTE: The official Steamdeck Dock cable does not fit into the Killswitch case's charging port. I cut away some of the rubber around the charging port to allow it to seat fully. This is optional. Alternate method is to use a USB-C Extender (adapter or cable).
dbrand official adapter
- Printables - https://www.printables.com/model/411302-project-killswitch-steam-deck-dock-adapter
- Thingiverse - https://www.thingiverse.com/thing:5620467
Printer Config:
- Supports - No
- Rafts - No
Hardware Assembly:
hardware required:
- Double Sided Tape (Optional)
- File
- Due to printer tolerances, fine tuning my be required.
- Take the left piece and the base and snap them together, please not the slit in the base should be pointed down, see photos.
- Then attach the right piece.
- Optional - Glue the double sided tape into the provided space in back support. Center the whole thing on the dock.