1 / 6
Endcaps for Meanwell HRP-300-12 Power Supply — zdjęcie 1
1 / 6

Endcaps for Meanwell HRP-300-12 Power Supply

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

End caps for a Meanwell HRP-300-12 power supply.

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
218
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

This is a set of endcaps I created for a Meanwell HRP-300-12 power supply.

The terminal endcap was designed to accommodate an AC power entry module I sourced from Mouser that provides an all-in-one plug+switch+fuse solution.

Additionally it also has spots for digital ammeter and voltmeter displays.

Power out was done with Anderson Powerpole terminals on the side, and I used some clear silicone bumpers from Tapp Plastics for feet.

Prints the caps with a translucent material if you want to use displays as well, otherwise go wild.

I originally designed the caps in Tinkercad, which has since eaten the original project. All I have left are the STLs now.

Print Settings

Printer Brand:

MK3

Printer:

Prusa i3

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

10%

Category: 3D Printing

Tagi