USB SSD 2280 M.2 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for a quite common USB to M.2 SSD converter. The Size of the PCB is about 27x96mm. I think its the only…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 205
- Wydruki
- 1
- Wyświetlenia
- 1142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a case for a quite common USB to M.2 SSD converter. The Size of the PCB is about 27x96mm.
I think its the only design here with ventilation.
The case needs no screws.
The fit is quite loose to be printable on my not so well calibrated diy prusa i3 clone.
The inventor source-files are present for anyone to change or adjust tolerances.
On mine i used a piece of paper in the back of the case so stop the module from moving in the case. This was easier then changing the model and reprinting.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0,25
Infill:
20
Filament: generic PLA orange
Category: Electronics