Pixel Watch Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charge your Pixel Watch in style with this stand. Remix of dtphantom's design, now with a proper cable channel.
- Ocena
- 4,526 / 5
- Polubienia
- 154
- Pobrania
- 1360
- Wydruki
- 32
- Wyświetlenia
- 4698
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
A remix of dtphantom's design.
I rebuilt the model keeping just the external and charger cutout dimensions.
I redid the cable channel from scratch, now being centred in the wall and following a smooth path all the way from charger to cable exit.
All the edges except those touching the print bed are radiused to avoid sharp corners.
It should be fine to print without supports, I flared the inner edge of the cable exit point so there is less bridging when printing. Wall thicknesses are minimum 1.2mm, so should work well with 0.4mm and 0.6mm nozzles.
I've uploaded the full F3D file so you can see how I did it.