1 / 1
Edgun Leshiy M-LOK magazine holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a magazine holder for the Edgun Leshiy 2. It mounts in a single M-LOK slot.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 159
- Wydruki
- 0
- Wyświetlenia
- 1440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — NoDerivatives
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
I made the test prints in CF-ABS, so the tension might be a little different for PLA. You will need to print with supports as the underside is not flat.
You will also need a pair of M-Lok screws and nuts.
I also have a 2 magazine holder version with an improved locking and release design.