1 / 3
2X PAVOTUBE T8-7X PLATE WITH CLAMPS — zdjęcie 1
1 / 3

2X PAVOTUBE T8-7X PLATE WITH CLAMPS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Plate for 2x Pavotubes T8-7X with threaded insert

Ocena
0 / 5
Polubienia
21
Pobrania
99
Wydruki
1
Wyświetlenia
568
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

I made a plate for holding 2x of my Pavotubes T8-7X (diameter 28.5mm) at once. On the photos I used some polycarbonate clamps that I had lying around but I also made a clamp from PETG that works as well. In the middle of the plate I used a 1/4" threaded insert to be able to mount it on a ball head or tripod.

Bill of materials:
1x threaded insert ruthex 1/4“-20x12,7: https://amzn.to/4bFLMMK
4x M3 x 12mm screws: https://amzn.to/4cBAkmh
4x M3 Locking nuts: https://amzn.to/4cDeVJI
I may earn a commission on qualifying purchases (at no extra cost to you)

Tagi