Pirate Sword -Full Size-
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made my own interpretation of an Pirate Sword, mostly based on Jack Sparrows sword. I modeled it using Sketchup.…
- Ocena
- 0 / 5
- Polubienia
- 68
- Pobrania
- 457
- Wydruki
- 0
- Wyświetlenia
- 1795
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
I made my own interpretation of an Pirate Sword, mostly based on Jack Sparrows sword. I modeled it using Sketchup. This model will also fit togehter directly after the print due to me making the pins a little smaller than the holes.
Warning! These files were made when 3D printers were terrible so fitment issues will occur on todays printers. If you want a good fitment I suggest you take the full sword file and cut it yourself and add a rod inside it.
Post-Printing
Glue all the parts together with strong epoxy and finish with some sand paper and a paint job of your choice. Good luck!
Category: Props