#3DTakoTuesday: Tako Bowl Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Your secrets are safe with this octopus! This is a remix of my original #3DTakoTuesday that hollows out the octopus to…
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 98
- Wydruki
- 2
- Wyświetlenia
- 461
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Your secrets are safe with this octopus! This is a remix of my original #3DTakoTuesday that hollows out the octopus to turn it into a container with a screw on top. Use it to store your extra sets of eyes (so many), accessories, or anything else you want to keep hidden away!
The "bottom" and "lips" parts were not changed and can be found with the original model at https://www.printables.com/model/302809
See here for more accessories and ways to customize #3DTakoTuesday: https://www.printables.com/social/411153-leonard/collections/312477
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.15 mm layer height
Infill:
10%
Filament: Inland PLA
Notes:
Supports are not required on the top part, but please ensure that your printer, slicer, and filament are capable of bridges. For the full scale, bridges of up to 75 mm are required if no supports are used. My personal preference is to take the minor imperfections of a bridging surface over the scarred surfaces and wasted material/time from using supports.
Post-Printing =============
Category: Toys & Games