1 / 8
#3DTakoTuesday : Halloween Pumpkin Candy Bowl — zdjęcie 1
1 / 8

#3DTakoTuesday : Halloween Pumpkin Candy Bowl

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an octopus shaped pumpkin bowl with a lid. Perfect for keeping some treats handy for the Halloween season. You…

Ocena
5 / 5
Polubienia
47
Pobrania
83
Wydruki
0
Wyświetlenia
728
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an octopus shaped pumpkin bowl with a lid. Perfect for keeping some treats handy for the Halloween season. You can swap out the triangle eyes for any of the eyes found here. Demo video: https://youtu.be/67PSM1I6LIQ

You will need to print the bottom part and the lips part from the original #3DTakoTuesday octopus.

See here for more accessories and ways to customize #3DTakoTuesday: https://www.thingiverse.com/leonardlee/collections/3dtakotuesday

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

0.15 mm layer height

Infill:

10%

Notes:

Support are optional on the top and body parts, but please ensure that your printer, slicer, and filament are capable of bridges. For the full scale, bridges of up to 75 mm are required if no supports are used. My personal preference is to take the minor imperfections of a bridging surface over the scarred surfaces and wasted material/time from using supports.

Post-Printing

use some superglue to secure the pieces that you want permanently attached during assembly

Category: Containers

Tagi