Guitar Pedal Enclosure 85x110mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an enclosure for guitar pedals.
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 200
- Wydruki
- 1
- Wyświetlenia
- 2046
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- GNU General Public License v3.0
This is an enclosure for guitar pedals. It comes with a blank panel you can put your own holes in, as well as a front panel I used on a Pepers' Pedals Overdrive.
It is designed to fit boards made for the Hammond 1590BB size enclosure and has an internal space of 85x100mm
Print instructions
The front and back plate are the same and require a m3 machine screw with a tapered head.
I included 3mf files with all the slices for the different colors if you want a rainbow pedal. Each of the words is set to a different depth so they will be different colors.
the Overdrive front panel should be printed with a 0.25 nozzle otherwise the text will not come out.
The body with holes has a 12mm hole for 9v power and two 9.5mm holes for I/O. The .3mf includes support enforcers and modifiers around the holes if you want to strengthen them with more infill.
I printed the body with a 0.6 nozzle for speed
Make sure to spray the inside with shielding spray or use copper tape to shield the electronics inside.