Portable Input Shaper (PIS) Mount (ADXL345)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed mount for Portable Input Shaper Module with RP2040 Chip.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 203
- Wydruki
- 0
- Wyświetlenia
- 2286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is for the FYSETC Portable Input Sensor (PIS) with RP2040 Chip that allows you to use a USB cable to connect an ADXL345 to your clipper host.
Klipper has built-in support for the ADXL345 accelerometer, which can be used to measure resonance frequencies of the printer for different axes, and auto-tune input shapers to compensate for resonances. The mount uses adjustable glass bed clips to hold the sensor in place. The width available to clamp onto the bed is 8mm-9mm.
For additional information: https://github.com/FYSETC/FYSETC-PortableInputShaper
Two (2) Clamps ( https://www.amazon.com/Printer-Adjustable-Compatible-Aluminum-Accessories/dp/B09NKV6H3H/ref=sr_1_11?keywords=adjustable%2Bglass%2Bbed&qid=1681931513&sr=8-11&th=1 )
Two (2) M3*8 screws
Note: Three versions:
- Bed Mount
- Bed and Sprite Mount
- Sprite Mount
If you would like to buy me a cup of coffee.