Makita battery carrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In an attempt to get more organized with my tools and batteries, I wanted to make something that I could use to store…
- Ocena
- 4,952 / 5
- Polubienia
- 390
- Pobrania
- 2313
- Wydruki
- 25
- Wyświetlenia
- 9520
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
In an attempt to get more organized with my tools and batteries, I wanted to make something that I could use to store the batteries as well as use as a way of easily transporting the batteries when I have to take them with me.
I have included files for making a carrier that holds 2,4 or 6 batteries (If someone needs a bigger, write and I will make it, but i doubt it ;P )
For more detail and assembly instructions check them here: https://www.instructables.com/id/Makita-Battery-Storage-and-Carrier/
Print instructions
The print is straight forward.
There are however three things I will point out.
- You will need support on the battery connector (See photo or .3mf)
- Be aware that it is a large flat print, so take actions in regards to warp and lifting corners
- Use appropriate filament. If you intent to use this outside or roughly, then I'm not sure PLA can cut it over time.