1 / 3
Wire Brush holder for ikea skaids T-Nuts - Hazet 2131
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Wire Brush holdder für ikea skadis
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 89
- Wydruki
- 4
- Wyświetlenia
- 732
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (1)Kolekcje (55)Powiązane
Simple wire brush holder for a Hazet 2131 wire brush and others.
The inner diameter is 12mm.
What you need:
M2 T-Nut, M2 nuts and M2 12mm screws are needed for mounting.
The holder uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178.
For more Skadis add-ons, check out my other models ;-)