Bucket Of Primates Door Hook/Door Opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My sister asked me to make her a monkey-shaped door puller, but I can't draw a monkey to save my life, apparently. So…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
My sister asked me to make her a monkey-shaped door puller, but I can't draw a monkey to save my life, apparently. So I found the ol' "Bucket O' Primates", snapped a pic, and away we went.
It's about 5 inches long, and ¼ inch thick as printed. I beefed up the print settings considerably to make it stronger.
UPDATE: v2 lengthens the torso for better grip, extends the toe to serve as a button-pusher, and cleans some edges. Increases thickness to ¼" from ⅛", which was too flexible.
UPDATE: v3 again extends the torso. Blunts the fingers a bit, and reverses the arms (which looks odd, but is far more functional).
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
60%
Filament: Ultimaker PLA Black
Notes:
Sliced using Cura. Wall thickness: 2mm (Wall line count: 7, calculated). Top/bottom thickness: 2 mm (Top/bottom layers: 10, calculated). Infill pattern: Gyroid. Build plate adhesion type: Skirt. All other settings: Default.
Category: Other