Weiner Dog Door Hook/Door Opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My sister asked me to make her a monkey-shaped door puller, but I can't draw a monkey to save my life, apparently.…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
My sister asked me to make her a monkey-shaped door puller, but I can't draw a monkey to save my life, apparently. However, I did have a picture of my cousin's shorthair dachshund, and on the logic that wiener dogs are at least as funny as monkeys, I gave that a shot. One Adobe illustrator image trace later, voilà!
It's about 5 inches long, and ¼ inch thick as printed. I beefed up the print settings considerably to make it stronger.
UPDATE: v2 improves the profile, enlarges the eye, and reduces the thickness. Even at ¼ inch, the shells & infill keep it quite rigid. Reduced print time & material usage.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
60%
Filament: Ultimaker Black. Black
Notes:
Sliced using CurarnrnWall thickness: 2mm (Wall line count: 7, calculated)rnTop/bottom thickness: 2 mm (Top/bottom layers: 10, calculated)rnInfill pattern: GyroidrnBuild plate adhesion type: SkirtrnrnAll other settings: Default
Category: Other