Open Ferrule for Drop Ceiling Tiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this as a quick pass-through opening in a standard 14mm drop-ceiling acoustical tile. It will fit larger…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I designed this as a quick pass-through opening in a standard 14mm drop-ceiling acoustical tile. It will fit larger tiles if required. Print at low-res and press-fit together. As is, the fit isvery tight…I recommend printing the outer ring at 101% for an easier fit without loss of friction.
I do not recommend excessive scaling. If you'd like to remake this at a different size, the Tinkercad source files are publicly available.
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator (5th Generation)
Rafts:
Doesn't Matter
Supports:
No
Resolution:
Low
Infill:
10%
Notes:
Two files: Inner and outer ring. Print outer ring at 101% for easier press-fit. Mark and cut tile based on outer ring.
Category: Other