1 / 2
Creality Z-Axis 42-34 Smooth 5mm Shaft Adaptor for 8mm Pulley Bore — zdjęcie 1
1 / 2

Creality Z-Axis 42-34 Smooth 5mm Shaft Adaptor for 8mm Pulley Bore

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a super simple adaptor to allow you to attach a 8mm Pulley Bore to a 5mm Motor Shaft.

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
251
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is a super simple adaptor to allow you to attach a 8mm Pulley Bore to a 5mm Motor Shaft. 

I did this so that I could attach a dampener to the y-axis (bed) of my Ender 2 Pro and adjust the pulley to correctly align the belt. This was easier to model than a whole new motor mount. 

 

I did print this in PLA but the motor gets very hot. I may re-print in PETG at a later date.

 

Print Settings (PLA):

  • 0.4mm Nozzle 
  • 0.2mm Normal Settings.
  • 100% Infill (Although I left it set at 15%, but the walls are so thing its effectively 100%)

Tagi