Mounted Screwdriver Holder - Prints Without Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed to hold my Husky Screwdriver set. This may work with other brands and sizes
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 323
- Wydruki
- 3
- Wyświetlenia
- 1062
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
There are two models here: one holds five ¼ / P2 and the other holds five 3/16 / P1 / T30 Husky screwdrivers. Both are designed to work with #6 (3.5mm) wood screws. I printed these in PLA with 30% infill and it seems more than strong enough for its purpose. If anyone has suggestions or requests, feel free to leave them in the comments. I'm more than happy to make modifications to the original to support other screwdrivers, other size screws, or any other reasonable modifications.
I recently added a third holder, which holds even smaller screwdrivers.