SteamDeck 90-Degree USB-C Adapter Strain Relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple strain relief fitted to the top of the deck for a common 90-degree USB-C adapter off of Aliexpress
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 897
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Awhile ago I purchased a 90-Degree USB-C adapter for my SteamDeck to make it easier to play while charging. Unfortunately it didn't really reduce the strain on the port as much as I would have liked so I made this little thing.
The adapter clips into the print which fits the chamfers on the top of the deck rather closely, transferring a large amount of the strain forces right into the plastic rather than into the USB-C port.
Built using fusion 360 and a modded Ender-5. Print in the default orientation with 0.2mm layer height, 20% infill and no supports are required.
Adapter in question (also on Amazon for significantly more $): https://www.aliexpress.us/item/3256804110102067.html
Update V2: Added a long version with a larger back support that helps keep loose adapters stable