Matchbox Porsche 918 Spyder Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The display will fit all Matchbox Porsche 918 Spyder release of the same casting.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 1189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068
Custom display base are also available from $5! Contact me to discuss what you want!
If you like my work, you can support me Printables Clubs! Just click the “Support & Join” button beside my name or here: https://www.printables.com/@GigaPenguin#join:279
Exclusive models are included too!
You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts
Description
The display will fit all Matchbox release of the same casting. It is not tested with the other Porsche 918 casting, if you want the base to fit that casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L
The display base is separated into 2 parts for easy printing and colour swap. The parts are:
1) Base
-BaseV4-Stripes.STL
2) Base back wall:
-BoxBackV4.STL
Print Settings
Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BaseV4-Stripes":
1) Start (Line gaps colour, mine is in white)
2) Layer 4 (Right stripe, mine is in yellow)
3) Layer 11 (Center stripe, mine is in red)
4) Layer 16 (Left stripe, mine is in black)
5) Layer 21 (Overall base colour, mine is in white)
Filament change layer for colours on "BoxBackV4":
1) Start (Background of the wall, mine is in white)
2) Layer 9 ("918 Spyder" outline, mine is in green)
3) Layer 14 ("918 Spyder" lettering and left stripe, mine is in black)
4) Layer 19 (Center stripe, mine is in red)
5) Layer 24 (Right stripe, mine is in yellow)
Assembly
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Facebook: https://www.facebook.com/groups/1115757609295068
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/