Yubikey 5C Nano Remover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little print-in-place tool to help you remove a yubikey 5c nano from your laptop
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 858
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Little print-in-place tool to help you remove a yubikey 5c nano from your laptop
Since the 5C nano is so small, it's hard to get any grip on it when you want to remove it from your laptop, so this tool will safely grab it for you.
This is my first attempt at a print in place hinge, so the tolerances may not be perfect. Easiest way to print is flat side of the hinge down, with supports only for the prongs that wouldn't have anything to hold them up. The 3mf should have this set up already.
After printing, remove the supports, then grip really close to the hinge and pull apart to free it.