Ultimate Filament Clip Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🎯 A strong, reusable clamp that prints in under 20 minutes using just 1 meter of filament.
- Ocena
- 4,543 / 5
- Polubienia
- 409
- Pobrania
- 2242
- Wydruki
- 67
- Wyświetlenia
- 7223
- Oceny
- 35
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🎯 Secure your filament without stress! A strong, reusable clamp that prints in under 20 minutes using just 1 meter of filament.
This model has been fully redesigned as Version 2, with improved strength, better ergonomics, and a more reliable threaded mechanism that works even with under- or over-extrusion. If you’re printing this today, I strongly recommend checking the V2 version. |
|---|
Printing Instructions
This model is designed to print reliably using standard printer presets.
Recommended settings:
Layer height: 0.2 mm
Walls: 3
Infill: Lightning
Supports: Not required
Material: PLA, PETG, ASA (PETG recommended for higher heat resistance)
Files are pre-oriented for best strength and print success
The part prints in about 10 minutes and uses roughly 1 meter of filament, resulting in a strong, efficient, and material-saving print.
🔧 After printing (important)
The rotating tip is printed locked in place.
After the print finishes, simply twist the tip by hand to release it — once freed, it will rotate smoothly as intended.
Commercial License & More Benefits
Expand your business opportunities with a commercial license for all my designs, plus exclusive benefits such as early and free access to new models. Get your benefits here:
https://www.printables.com/@jajaum3d#[email protected]
💚 Crypto tips welcome!
Join the “I sent crypto to a designer” club.
Description
After testing multiple filament clip designs, I created this clamp-style filament holder for a stronger and more reliable grip. Unlike one-piece clips that weaken PLA over time, this design eliminates stress on the filament and provides long-term durability.
The rotating grip mechanism ensures a firm hold while preventing filament breakage, and its minimalist structure offers maximum strength with less material. Prints in under 20 minutes, making it a quick and effective upgrade for any 3D printing setup!
See all my designs on Cults:
https://cults3d.com/en/users/jajaum3d/creations
All my designs are protected by Copyright Law. Purchasing does not grant the right to sell any digital file or printed model of my designs without explicit consent. Please respect the hard work of 3D artists by not sharing or selling digital files.