Lego inspired Cutless Split Hilt and Blade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix to improve resolution on Hilt and print it as one piece without support. Blade fits in with a Square peg.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 322
- Wydruki
- 4
- Wyświetlenia
- 1052
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had some issues with the original when I tried to print the hilt and Blade in 2 colors this remix fixes that.
Print Hilt upside down no need for support but it doesn't hurt if you want to use it.
Print blade vertical with support.
.6 works fine with .2 height
Fit tested with the Lego 10x. https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale
I have printed it 3x and it worked great. You might consider putting the Hilt at 101% or the blade at 99% if you don't have dimensions dialed in well.