1 / 6
35mm film mask insert for Mamiya RZ67 220 back — zdjęcie 1
1 / 6

35mm film mask insert for Mamiya RZ67 220 back

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

XPan, but SLR :D I can't afford buying XPan and wanted to have more framing control than rangefinder cameras offer, so…

Ocena
0 / 5
Polubienia
27
Pobrania
126
Wydruki
1
Wyświetlenia
1076
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

XPan, but SLR :D

I can't afford buying XPan and wanted to have more framing control than rangefinder cameras offer, so after a lot of experimentation I found out a way to shoot 6x17 (or more like 24x65) on my Mamiya RZ67 with 220 back.

For the moment general idea and tutorial is on my highlighterd story

One thing I was lacking was proper film flatness, as almost all 135 film tends to curl in this scenario, thus only the horizontal center is in proper focus plane. Not anymore, as I finally bought a 3d printer last week :D

This is a simple snap-in pressure mask, that hold about 2mm of film (top an bottom edges), making sure it stays flat. Instalation is quite straightformard, can't be installed the wrong way (no, I'm not holding your beer...). At this moment I've tested this with one roll and everything seems to be working, nothing gets scratched - I've used Fiberlogy Impact PLA, but I suppose black nylon or PET-G could be better.

Important thing is to print it upside down, so the side touching the film is the smoothest and it won't need supports.

I know this isquite niche accessory, but maybe someone will find it useful ;)

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.12-0.16

Infill:

10-20

Filament: Fiberlogy Impact PLA

Notes:

On classic FDM printers, print it upside-down, so the side touching the film is smoothest

Category: DIY

Tagi