Mac Daddy Remix Grip

Posting as a work in progress, as I don't have the Mac Daddy Remix frame printed out to check the fit. If you choose to try it, know that you may need to sand it a little.

Mac Daddy custom grip for Mac Daddy remix with the Picatinny rails at the back.

If your Mac Daddy has the socket at the rear for a brace or stock adapter, use this grip: https://www.printables.com/model/304097-mac-daddy-grip

Grip is modeled to fit properly with "fuzzy skin" turned on in Cura slicer to give the grip texture, but still fit on the frame. GRIP WILL BE SMOOTH AN FIT LOOSE IF YOU PRINT IT WITHOUT FUZZY SKIN.

My Odysee page - https://odysee.com/$/invite/@Suburban:1

Print Settings

Printer Brand:
Creality

Printer: 
Ender 3

Supports: 
No

Resolution:
.2mm

Infill: 
65

Filament: Overture PETG Black

Notes:

Fuzzy Skin - Yes
Fuzzy Skin Outside Only - Yes

Fuzzy Skin Thickness - 0.3mm
Fuzzy Skin Density - 1.25 1/mm
Fuzzy Skin Point Distance - 0.8mm

I keep the walls pretty thick - 2.8mm. Infill 60-65%, but it doesn't matter too much with the wall thickness.

Print with butt of the grip down on the build plate.

I printed the grip with Overture black PETG, so that it won't go soft when it gets hot.

For PETG, I set part cooling fan at 0%, 100% for bridging.

I don't use supports for grips. A little cleanup is needed, but it won't ruin the texture as much as printing with supports.

Have your bridging settings squared away.