eBike Lectric XP 2.0 Radpower Mini Seat Airtag Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Airtag mount installs on the front of the comfort seat (universal mount plates may fit other seats) using M5…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 649
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Airtag mount installs on the front of the comfort seat (universal mount plates may fit other seats) using M5 Bolts and Nuts. I used the universal mount on my upgraded Cloud 9 seat successfully.
The Airtag must be firmly snapped into the Airtag Holder component prior to installing the Holder Top component.
For the Lectric XP 2.0 comfort seat you will need to print the following:
1 x AirTag Holder
1 x Holder Top
1 x Top Base
1 x Bottom Base
For other bike seats you will need to print the following:
1 x AirTag Holder
1 x Holder Top
1 x Top Base Universal
1 x Bottom Base Universal
The universal mount work with:
Cloud 9 Wide Seat
Original Lectric Seat
And many more…
This design requires no supports. Print in the orientation downloaded.
For best results print with PETG
.20 Layer Height
4 top & bottom layers
3 walls
12% infill (gyroid)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
12
Filament: Any PETG Black
Category: Sport & Outdoors