Apple Magsafe, Watch and Qi Charger 3-In-1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Iphone Magsafe Charger, Apple Watch Charger and CHOETECH Qi Charging pad Docking station
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 1227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I have remixed this model to suit my needs a little bit more than the original available on Thingiverse. (Original)
The original used two magsafe chargers, but i wanted to reduce cost and had a spare CHOETECH Qi charger which is suitable for charging airpods or small QI devices.
I adjusted and reworked the model to fit the wireless charger as well as added a thicker and stronger base and a cable channel at the back.
The Qi charger you will require is the CHOTECH Qi charger, measuring 9.1cm x 9.1cm x 0.85
You can find the same charger on Ebay HERE
I have also attached a blank base as well as the base with the additonal Magsafe charger.
- Printed at 0.2
- Printed on back orientation with manual supports.
- 20% Infill Minimum (The more infill the heavier the base)
- 200c Temp
- 60c Bed
- PLA
Any questions please ask.