Quick Release Plate for Quantaray Tripod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got a free tripod from a friend who was moving that had long ago lost its quick release plate. Finally got around to…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I got a free tripod from a friend who was moving that had long ago lost its quick release plate. Finally got around to modeling up a replacement. The shape is loosely based on the Amazon Basics plate.
I used these 1/4-20 thumb screws but anything that has a ~6mm smooth shaft should work fine. After printing, screw the threads through the hole, it will be tight until it makes it through, then it will spin freely.
Print Settings
Printer:
Creality CR-6 SE
Rafts:
No
Supports:
No
Resolution:
.
Infill:
30% Gyroid
Filament:
Hatchbox PLA
Black
Notes:
Designed to print with no supports or other adhesion additions.
Category: Parts