RFID Shed Door Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple RFID locking system for my shed but without putting anything outside so I didn't haft to make anything…
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 368
- Wydruki
- 1
- Wyświetlenia
- 2969
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A simple RFID locking system for my shed but without putting anything outside so I didn't haft to make anything weather-proof. Luckily the RFID range easily went through the window of my shed so I designed a case to hold it in the corner of the window and then a case to hold the raspberry pi and relay switch.
I use a solar power system in my shed and I already have a lot of LED's on it and found the Lock would not engage whilst the lights were on so I implemented a button (link below) that would tell the Pi to break the circuit of the light with the relay and in turn connect the circuit for the lock.
I decided to add the 5v fan to the control box as my shed is insulated and gets quite hot so I didn't want the Pi to overheat.
The case for the RFID reader worked really well so I might create some variations of it for mounting on a wall when I get time.
Parts Used:
-RC522 RFID reader
-Green LED
-Red LED
-2 x 330Ω resistors
-1-Relay 5V KY-019 Module
-Raspberry Pi Zero W
-5v fan (optional)
-DC12V Electronic Door Lock B3H3
-Tactile Switch
-4 x M3 10mm Bolts and Nuts
Button Holder: https://www.thingiverse.com/thing:2235586
Print instructions
All printed in PETG to better hold up to the heat in my shed. Supports needed on Control Box and Control Box Lid.
0.15 Layer Height