Bahtinov Mask (Universal)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Bahtinov Mask is a useful tool for focusing your telescope or DSLR Camera, here are 10 different Masks for your needs.
- Ocena
- 5 / 5
- Polubienia
- 96
- Pobrania
- 1202
- Wydruki
- 3
- Wyświetlenia
- 5211
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In order for the Bahtinov masks to work properly a certain focal length needs to be exeeded. The minimum focal length stands in the modelname (min750mmFL), you can still use the mask with a lower focal length, but I wouldn´t go to far below. However going higher is not a problem.
The maximum aperture (max210mmAP) refers to the actual lens/ mirror size not the outer diameter of the telescope. I think I left enough space so the mask still fits over the outer diameter.
The screws come in two sizes, if you scope is quite a bit smaller to the max aperture I would use the longer ones. Also don´t thighten them so much that it bends the mask just enough so it doesn´t fall off (centering the mask is not needed as long as it´s not completely off).
Tip: If the mask is to big for your printer you can cut it in four halfs (PrusaSlicer has such a funktion), then glue them together it´s what I did with my mask.
Note: I got the patterns for the Masks from a Bahtinov Mask generater webside:
Also if there is a certain size that doesn´t fit with the existing masks or a mask that doesin´t fit at all, just hit me up I can add them to the existing ones.