1 / 5
Bowden Tube Lifter Arm (for Belt-Chain Wire Harnesses) — zdjęcie 1
1 / 5

Bowden Tube Lifter Arm (for Belt-Chain Wire Harnesses)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This lifter arm serves to keep the bowden tube elevated during printing on the belt-chained wire harness on FDM printers

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
302
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

A nice mini upgrade to your FDM printer that uses a long Bowden tube to the hotend.  As seen in the pictures, this lifter arm holds up the tube during printing, allowing the filament to move more directly without the tube twisting or bending while printing.

The dimensions for this lifter arm are 5 mm wide, 15 mm long at an 135 degree angle.  It can slide back and forth between the space easily with an indented space long enough for movement without being removed from the belt-chain during printing(See Pictures).  The hole is wide enough for the Bowden tube to slide through.

I made this for my Anycubic - Chiron and has served me well.  The Bowden tube kept twisting and the zip ties did hold it properly.  Now, no more clogging . . . at least from the tube, lol!

Hope this can be useful for you!  Enjoy!

Tagi