1 / 1
4 State QRP Club (4SQRP) "Challenge Coin" — zdjęcie 1

4 State QRP Club (4SQRP) "Challenge Coin"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Something to use at 4 State QRP's "OzarkCon" ham convention (and others) to cadge drinks, etc.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
97
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

4 STATE QRP GROUP "Challenge Coin" in 2 parts (Coin Base and LOGO) to make it easier to print the LOGO part lettering in different color filaments.

Print the coin part first in Blue (should really be light blue) and then print the LOGO part.

Printing the LOGO, start with Black. Assuming .2mm/layer (recalculate if you use different layer sizes), change color to White at layer 11 (2.2mm) and then to Gold at layer 16 (3.2 mm) for the final part of the print. That's about all there is to it.

I designed it using Autodesk's "free for non-commercial users" Fusion 360 and the ".f3d" files are included.

Print Settings:  .2mm/layer resolution, 20% infill, 

FilaCube brand PLA2 filament was what I used.

Filament color:  Blue, Black, White & Gold

 

Tagi