1 / 2
Bambu Build Plate Holder with 2 tapered slots and tongue — zdjęcie 1
1 / 2

Bambu Build Plate Holder with 2 tapered slots and tongue

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed from the awesome design by debren27.

Ocena
0 / 5
Polubienia
16
Pobrania
110
Wydruki
0
Wyświetlenia
849
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I took off the top layers on the “middle bit” and selected a sparse infill pattern of Honeycomb in Bambu Studio.

I didn't want it completely hollow to the bottom, as I want to use it to dry after cleaning the glue off the bed, so the honeycomb should act as a nice catchment.

Printed at 0.2mm layer height in Overture light blue.

Cheers to debren27!  Applied same licensing :).