Steve Name Tag from Stranger Things
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The name tag for the character Steve from Stranger Things
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed at 0.2 mm layer heights with a 0.4 mm nozzle in Overture orange, gray blue and easy black PLA (the blue should have been darker, but I went with what I had).
The color change was done in Cura using a post-processing script at the layers where the next section starts. For me, that was starting with orange, filament change at layer 6 to swap to blue, then another at layer 7 to swap to black.
I included the reference photo I used and of the print. After taking that photo, I ran a sharpie around the outside to black out the orange and blue layers on the sides.