Tension Stud Gear for Singer Fashion Mate 237
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement tension stud gear for the Singer Fashion Mate 237 thread tension assembly.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement part I made for my Singer Fashion Mate 237 sewing machine. It is the gear like plastic bit that holds the thread take-up spring in place. The plastic had deteriorated, and it could no longer hold the spring. I think it will fit many other models of vintage Singer sewing machines that have a similar thread tension assembly.
To replace, remove the original gear, press fit the new gear in place. If the fit is too tight, you can drill out the hole a bit and use glue to secure it in place.
Made in Fusion 360 by measuring the original gear and stud.
Printed with stock Ender 3 Neo, Hatchbox PLA - Gray, 0.2mm layer height