1 / 2
Crochet Scrubby Dispenser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold 5-8 Crochet Scrubbies With weighted Base
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 858
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (46)Powiązane
INTRO
My wife is into crochet and started to make our own kitchen scrubbies out of toile ribbon. It's a pretty standard pattern (like this Video). So I designed this up in Fusion 360 so we would have a fun dispenser. The scrubbies were 20 mm tall and had an 80 mm diameter. I hollowed out the base so sand could be added for weight.
Printer Settings
Supports: Yes
- Body: you only need support for the opening
- Base: I had the legs in the air and use tree supports to make it all the way up the legs. but you might not need them
Infill: 10-100%
- Body: 10% or 20% you will want to make the top lighter so it won't be to top heavy
- Base: I did 100% to give the base as much weight as possible.
Assembly
- Glue the pin into the base
- And sand into the base. make sure the sand isn't poking above the rim
- Apply glue to the rim of the base
- line up the pin and the legs then hold down tell dry