1 / 3
Case/Stand/Holder for Lilygo T5 4.7 inch E-paper Display
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case/Stand/Holder for Lilygo T5 4.7 inch E-paper Display which is closed off with the exception of charging port access.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 148
- Wydruki
- 0
- Wyświetlenia
- 1755
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (30)Powiązane
This is a case/stand/holder I designed for my Lilygo 4.7" E-Ink display. The case is completely closed off to prevent dust from entering, with the exception of the charging point on the bottom. I'm using mine to display weather info that automatically updates, so I don't need access to the buttons. A small screw holder part has been designed to hold the display in place.
Parts:
- M2 x 4mm Screws (x5)
- M2 Threaded Insert Nuts (x5)