Drink dispenser large
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remake of the "Drink dispenser" made by Ljhtom. Thanks for that! It deals with half liter cans.
- Ocena
- 4,571 / 5
- Polubienia
- 181
- Pobrania
- 532
- Wydruki
- 6
- Wyświetlenia
- 3340
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
First of all thanks to Ljhtom for this amazing design!
The drink dispenser large
Description:
This dispenser was updated to deal with half liter cans (65mmx168mm) instead of the small ones. I also seperated some pins from the original design, so there is no need for any support structure and they are easy to mount. The print is splited in 4 parts to fit the Prusa MK3 bed.
Printing:
I recommend using PLA with 5% infill (more than enough). To print the horizonal holes inside of the parts I recomend 0.2mm layer height, which works realy well for me.
Enjoy and take a cool sip of you favourite drink ;)