Parametrical Planter Pot Inlay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable (Fusion360) inner planting pot, fitting to all of your existing pots.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 122
- Wydruki
- 2
- Wyświetlenia
- 528
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Measure the upper and base diameter of you existing pot and the height. Depending on the shape you should substract 3-7mm on each measurement, then adopt the parameters in the Fusion 360 file. If you want, you can also adopt the amount of insets in the bottom to reduce the overhangs. It's important to have an air gap between the inner and outer pot!
For me, 1mm wall thickness (2 lines in the print) and PLA works out perfectly. I recommend adding some clay granules in the bottom.
I added some finished .stl files for some of my pots I have at home. If you need another size and don't have Fusion360, just send me a DM with the three final measurements and I'll upload them here.