1 / 4
Clips/Pins/Pegs for the Prusa Face Shield RC3 — zdjęcie 1
1 / 4

Clips/Pins/Pegs for the Prusa Face Shield RC3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Like many other people, we had issues with some of the plastic sheets falling off the face shields.

Ocena
4 / 5
Polubienia
1
Pobrania
197
Wydruki
0
Wyświetlenia
729
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Like many other people, we had issues with some of the plastic sheets falling off the face shields. There are multiple solutions to that, including the rubber band trick that holds on both sides but having a stretched rubber band around peoples eyes is not the best solution.

As a result, at the University of Ioannina a while ago we started working on some clips for our remixed face shields, even shields with embedded clips. They ended up being very handy and stable so we prepared them for the Prusa RC3 version too!

Hope this will come handy to you :)

For more details see below.

Thank you!

Print instructions

-----Files Included-----
1) Left_Clip.stl
2) Right_Clip.stl
3) Clips.step

-----Description-----
-If you just want to print the clips then the files 1) and 2) are for you. Put them to your favourite slicer and export them to gcode.
-If you want to perform changes to the current design then open with a CAD software the file 3) which is a step file that contains both left and right clips.

Tagi