Snifflet (Minecraft)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's my take on what the sniffer will look like
- Ocena
- 4,833 / 5
- Polubienia
- 472
- Pobrania
- 1138
- Wydruki
- 5
- Wyświetlenia
- 10 157
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE 7/11/2023: Added stls. Sorry about that. Only had 3mfs on here for the longest time.
My attempt at modeling the upcoming minecraft sniffer! Don't have the actual in-game mob for reference. . . I may update the model when the real sniffer is released, but honestly I'm pretty happy with how this model looks. B T dubs this is for the small sniffer not the big one
How to Print
Skill
But Really
Print each color separately, except for the snout which has two color changes (yellow → red → yellow).
Layer height of .2mm works for everything, but the eyes print well at .10mm
Assembly
After removing supports, assembly should be straightforward. The Dark Green parts on the Snout do need adjusted with a blade to fit better (they're small so it's easier to just adjust it manually)
No glue (🤮🤮🤮) required! Just use spare strands of filament (1.75mm) to hold things together. There's a trick to getting filament to stay put, but it's a secret.
Actually you know what I'm not taking questions so if the filament is loose, just crimp one or both of the ends to make sure it stays securely in place.
If you have any questions just ask 🧡