Gas Meter G4 Pipersberg AI-on-the-edge without reflection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the gas meter holders for the ESP-32 based ai-on-the-edge system
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 1303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount is designed to attach an ESP32-CAM microcontroller to an gas meter. Together with the open source firmware "AI-on-the-edge" (https://github.com/jomjol/AI-on-the-edge-device) of the user Jomjol it is possible to read the electricity meter automatically and send it via MQTT to a server.
You can find my tutorial for this project on Youtube: https://youtu.be/iUgxwbfkIqU
It is similar to a lot of other designs except that I added a “tunnel” for the light to avoid reflections. I also gave it solid walls for two reasons: fewer light disturbances and leaving out the sides in most designs does not save filaments as supports are needed.