1 / 3
Bambu Lab X1 / X1 Carbon Door Handle - Logo Cut-Out
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Door handle replacement with a Bambu Lab logo cut-out.
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 335
- Wydruki
- 7
- Wyświetlenia
- 1872
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 7) (Komentarze: 8)Remiksy (1)Kolekcje (126)Powiązane
Bambu Lab X1 / X1 Carbon door handle replacement with a Bambu Lab logo cut-out. Print with flat surface facing down.
Layer height: 0.16mm
Wall loops: 3
Top / Bottom shell layers: 6
Support - Enable support: No
Warning: Be careful when you screw on your new door handle in that you don't over tighten it as you may crack the glass. Make sure that the tiny washers are still on both sides of the screws.