Actobotics X-Rail® End Cap Flat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Available in stl (inches or mm). An endcap designed for Actobotics X-Rail®. Has two fastening methods. Can clamp…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Available in stl (inches or mm).
An endcap designed for Actobotics X-Rail®. Has two fastening methods.
Can clamp directly to the X-Rail end (like a regular endcap). If there is not threads on the corner holes of the X-Rail one can also thread this 3D print, and use clamping force and use the whole thing as a X-Rail Nut and End Cap combo. Won't slide as well though.
Highly recommended to use higher infill if you seek to use the clamping force of the sides.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.001" or 1/64"
Infill:
100%
Filament:
Any ABS
Notes:
At maximum resolution you will need is .001", but you can probably get away with 1/64" of resolution. Should still have enough resolution that the holes are the proper size.
Category: Robotics