1 / 6
🔀 Rustical twisted cabinet/drawer handles.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Twisted cabiner/drawer handles in a slight rustical style with M4 thread for attaching. Single or double spiral.
- Ocena
- 5 / 5
- Polubienia
- 156
- Pobrania
- 483
- Wydruki
- 3
- Wyświetlenia
- 1639
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (27)Wydruki i komentarze (Wydruki: 3) (Komentarze: 9)Remiksy (0)Kolekcje (157)Powiązane
Update 6.11.2022: V2 versions of the handles - improved connector ends, so it better fits in the stand holes.
Added more variations.
Info:
- cabinet / drawer handles
- M4 threads on the bottom of each stand for attaching to furniture
- slight rustical style
- single or double spirals
- choose from multiple variations
Print instructions:
- see 3mf
- 0.2 mm layers in general
- no supports
- handle:
- print handle standing, use a lot of brim (like 12mm)
- there is slight overhang around the height 11.66, descrease layer height there, so it is printed nicely (down to 0.08mm)
- increase infill at the ends, if your drawer is heavy
- if you want different size (length between the holes in the furniture is diferent), you can easily scale Z Axis of the handle (the hole in a stand is more deep, so the handle will still fit in there)
- given handle size is for the length of 12.8cm between bolt holes
- so if you want handle for 14cm distance between holes, increase handle size by 1.2cm
- if you have big stringify problem, post processing will take some time
Assembly:
- insert handle to the stands (use a drop of glue or adhesive tape for inside connector, if it is too loose)
- Use M4 bolt for attaching handle with stands to the drawer/cabinet