1 / 7
Face Mask Clip for R95 H-filter — zdjęcie 1
1 / 7

Face Mask Clip for R95 H-filter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Face Mask Clip for R95 H-filter inspired by GarageLab project. Modified for using the rounded rubber.

Ocena
0 / 5
Polubienia
1
Pobrania
94
Wydruki
0
Wyświetlenia
1200
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Face Mask Clip for R95 H-filter inspired by GarageLab project. Modified for using the rounded rubber.

The project contains a source file (* .3fd, Fusion 360) for your further modification or improvement.

You also need:
2x Rubber thread d=1.5mm, l=150mm
1x Filter paper w=200mm, l=240mm

The recommended paper folding is shown below.

Recommended accessories (PETG!)
https://www.prusaprinters.org/prints/30441-face-mask-nose-clip

GarageLab project
https://garage-lab.de/wp-content/uploads/garage-lab-duesseldorf-mund-nasenschutzmaske.pdf

Print instructions

Settings: 0.15 mm QUALITY
Infill pattern Gyroid, 25%
Filament: PETG

Depending on the settings of your printer, you will need to pass the rubber holes through a 2.0 mm drill bit

Tagi